Br series wave converter

Author: C | 2025-04-24

BR WAV Converter v3.1 (PC) The BR Series WAVE Converter allows import/export of BR-Series tracks into WAV/AIFF files. BR WAV Converter v3.11 (Mac) The BR Series WAVE Converter

BR Series Wave Converter - cosmosmusic.com

Respective owners. * CompactFlash andare trademarks of SanDisk Corporation and licensed by CompactFlash association.* BOSS Corporation is an authorized licensee of the CompactFlash™ and CF logo () trademarks.1. Introduction to BR Series Wave Converter This software converts sound data between computer sound file (WAV and AIFF files) and BR-800/600/900CD wave data formats. Such sound files can be used by music production software. What’s more, if your computer is equipped with a fast processor, you can use it to complete conversions even more rapidly than with the BR itself.Before you begin We recommend that you make a backup as a precaution against unexpected destruction of files by the system or driver.1 2. System Requirements Apple Macintosh Series Mac OS-X 10.4.2 or later • While under most conditions, a computer similar to the above will permit normal operation of the BR Series Wave Converter, Roland cannot guarantee compatibility solely on these factors. This is due to numerous variables that may influence the processing environment, such as differences in motherboard design and the particular combination of other devices involved.3. Setup for Reading from and Writing to the Memory Card with the Computer This software can only be used with memory cards (SD Card/CompactFlash) formatted on a BR Series device (BR-800/600/900CD). If your memory card has already been used with Windows or another system, first format (initialize) the card with a BR Series device before using it with this software.3-1. If using a MICRO BR series Before using this software, connect the computer to the MICRO BR series via USB. If using a device that provides for the switching of its USB functionality, set its USB mode to “Storage.” * For more detailed instructions on connecting your computer via USB, refer to the Owner’s Manual for the device you are using.3-2. If using a BR-800 Before using this software, connect the computer to the BR-800 via USB. At this point, select [MENU] – [USB] – [WAVE CONVERTER]. * For more detailed instructions on connecting your computer via USB, refer to the Owner’s Manual for the device you are using.3-3. If using a BR-600/900CD Before using this software, connect the computer to the BR-600 or BR-900CD via USB. At this point, select [BACKUP] as the [Type] in the BR-600/900CD’s [USB STORAGE] setting. * For more detailed instructions on connecting your computer via USB, refer to the Owner’s Manual for the device you are using.4. Installing/Uninstalling The Software Copy the file named “BRWC” to your hard drive. In uninstalling, delete the file “BRWC” in the folder you installed. * For details on copying, refer to the Mac OS manual or help function.2 5. Names of Things and What They Do The following provides an introduction to the user interface for the BR Series Wave Converter, allowing you to easily find out what everything is used for.61 234 57891 Drive select field Use this to select the drive containing BR Series songs.2 Song select field Use this to select BR Series songs. The four digits at the left of the title indicate the fifth through eight digits of the song folder name.3 Song Information display field Information about the selected song is displayed in this area. Shown here are the device used in creating the song and the type of song data.4 [Function Select] button Use this to switch between Wave Converter’s Export and Import functions.5 [Export ALL] button Use this when Wave Converter is set to Export to select all tracks containing data at one time.6 [Track Select] buttons Use these buttons to select the tracks to be exported or imported. The track status is indicated by the color of the button. Color of buttonTrack statusWhiteTrack contains no recorded dataGreenTrack contains recorded dataRedSelected track contains no recorded dataOrangeSelected track contains recorded data7 [Stereo Link] button Use this to save stereo WAV/AIFF files when Wave Converter is set to Export. When this button is switched on (button is green), odd-numbered tracks are saved to the left channel, and even-numbered tracks are saved to the right channel. When switched off (button is white), odd- and even-numbered tracks are saved as monaural WAV/AIFF files.8 [GO] button Click this to carry out the export or import of the selected tracks.9 [EXIT] button Click this button to quit Wave Converter.3 6. Operation 6-1. Starting the application Double-click the BRWC.exe icon. The application will start up.6-2. Exiting the application Click either the Close button located in the upper left of the window, or the [Exit] button located in the lower right of the window. The application will exit. Command + Q key on your keyboard is also usable.6-3. Selecting a memory card Select a drive from the [Drive] popup list in [Song Select]. If the selected drive has a memory card formatted for use with the BR Series, the content of the

BR Series Wave Converter - Archive.org

Up to that point will be saved, without being deleted.6-6. Converting WAV/AIFF files into BR Series data (Import) 1. Click the [Import] button in [Function Select]. The [Import] button switches on (button is green), and the [Export ALL] and [Stereo Link] buttons are unavailable. 2. Click the [Track Select] buttons to which the WAV/AIFF file is to be registered. The [GO] button is enabled for use. * Clicking a selected [Track Select] button deselects the button. * You can select tracks to which data is already registered. In that case, the previous data is overwritten with the saved data, erasing the previous data content. * You can only select up to two tracks to import simultaneously. * If you specify two tracks when loading a monaural WAV/AIFF file, the same data will be placed in each of the specified tracks. * If you specify one track when loading a stereo WAV/AIFF file, the left channel data will be placed in the specified track.3. Press the [GO] button. A dialog box will appear. 4. Select the file that you wish to load. 5. Press the “Open” button. The file will be converted into BR Series format, and will be stored in the specified track. * This software is capable of handling 44.1 kHz, 16-bit PCM WAV/AIFF files. Be sure to convert the data to this format when converting MP3 or other types of data. * The time required for loading and conversion will depend on the size of the original file.5 6-7. Checking the software version Clicking [About BR Series Wave Converter] in the [BRWC] menu opens up the version dialog.6-8. Error messages MessageExplanationNot BR series memory card.You selected a memory card that was not formatted for the BR Series. Check the memory card and try the operation once again.Can’t read card.You performed a read operation on a memory card that was not ready. Check the memory card and try the operation once again.Can’t write to card.You attempted to write to a protected memory card. Or, you performed a write operation on a card that was not ready. Check the memory card and try the operation once again.Failed to read wave file.The WAV/AIFF file you attempted to read was not a PCM, 44.1 kHz, 16 Bit, and therefore could not be read. Please check the format of the file.Failed to write wave file.Check to confirm that the file you are attempting. BR WAV Converter v3.1 (PC) The BR Series WAVE Converter allows import/export of BR-Series tracks into WAV/AIFF files. BR WAV Converter v3.11 (Mac) The BR Series WAVE Converter The BR Series WAVE Converter allows import/export of BR-Series tracks into WAV/AIFF files. BR WAV Converter v3.11 (Mac) The BR Series WAVE Converter allows import/export of BR

BR Series Wave Converter: For Windows

To write is not being used by another application. If the file is currently being used, quit the other application and try writing the file again.No free space on save-destination card.There is insufficient space on the save destination memory card. Increase the amount of free space by erasing unneeded data. Then try the conversion operation once again.Sampling frequency is not 44.1kHz. Can’t convert wave file to BR track.The WAV/AIFF file you have selected to convert from WAV/AIFF file to BR Series data (Import) has a sampling rate other than 44.1 kHz. Please load a WAV/ AIFF file with a sampling rate of 44.1 kHz.Specified wave is too short (The data in the WAV/AIFF file you have attempted to convert to BR Series data (Import) is less than 1 second in duration. BR Series devices are not capable of handling data lasting one second or less.Event maximum reached. Can’t create new event.Excessive amount of data in track.Excessive amount of data in song.6The available space for performance data from the conversion (Import) of WAV/AIFF files to BR Series data is full, and no new performance data can be added. First, erase any unneeded data using Song Optimize on your BR series device (or by using some other method), then perform the conversion over again. The recording time for the data on the specified track is too long. Use the BR Series device’s Track Edit function to shorten the recording time. This software is capable of outputting monaural data of up to approximately 6 hours and 45 minutes (approximately 3 hours and 22 minutes in stereo). The total recording time of the song is too long. This software is capable of data of up to approx. 9 hours (approx. 4 hours and 30 minutes in stereo). With the BR-80, this will be approx. 3 hours and 20 minutes in monaural (approx. 1 hours and 40 minutes in stereo).1PS BR Series Wave Converter (for Macintosh) (for MICRO BR series/BR-800/BR-600/BR-900CD) Copyright © 2011 BOSS CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of BOSS CORPORATION. BOSS is a registered trademark of BOSS Corporation in the United States and/or other countries. * Unfortunately, it may be impossible to restore the contents of data that was stored in the unit’s memory or memory cards once it has been lost. BOSS Corporation assumes no liability concerning such loss of data. * To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels. You may prefer to use headphones, so you do not need to be concerned about those around you. * Unauthorized duplication, reproduction, hiring, and lending prohibited. * Avoid touching or scratching the shiny underside (encoded surface) of the disc. Damaged or dirty DVD discs may not be read properly. Keep your discs clean using a commercially available disc cleaner. * In the interest of product improvement, the specifications and/or contents of this package are subject to change without prior notice. * Use of the song data supplied with this product for any purpose other than private, personal enjoyment without the permission of the copyright holder is prohibited by law. Additionally, this data must not be copied, nor used in a secondary copyrighted work without the permission of the copyright holder. * The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may not always match what appears in the manual. * Recording, duplication, distribution, sale, lease, performance, or broadcast of copyrighted material (musical works, visual works, broadcasts, live performances, etc.) belonging to a third party in part or in whole without the permission of the copyright owner is forbidden by law. * Do not use this unit for purposes that could infringe on a copyright held by a third party. We assume no responsibility whatsoever with regard to any infringements of third-party copyrights arising through your use of this unit. * Apple and Macintosh are registered trademarks of Apple Inc. * Mac OS is a trademark of Apple Inc. * All product names mentioned in this document are trademarks or registered trademarks of their

Roland BR Series Wave Converter

First song is displayed on the screen. * Nothing is displayed in [Song] unless a BR Series-formatted memory card is inserted in the selected drive. * Once a drive is selected, do not insert/eject its memory card.6-4. Selecting a song Select a song from the [Song] popup list in [Song Select]. With songs that have been created on a four-track device, the [Track Select] buttons will be limited to the selection of only four tracks.6-5. Converting BR track data into WAV/AIFF file (Export) 1. Click the [Export] button in [Function Select]. The [Export] button switches on (button is green), and the [Export ALL] and [Stereo Link] buttons are enabled. 2. Click the [Track Select] buttons assigned to data in WAV/AIFF files that you want to convert (buttons are green). The [GO] button is enabled. * Clicking a selected (orange) [Track Select] button deselects the button. * You can select multiple tracks. * Pressing the [Export ALL] button selects all tracks containing data. * When the [Stereo Link] button is switched on (button is green), pairs of adjacent tracks are saved to stereo WAV/AIFF files (odd-numbered tracks are saved to the left channel, even-numbered tracks are saved to the right channel).3. Press the [GO] button. A dialog box will appear. 4. Select the file type. * Select either Windows RIFF Wave (*.wav), Windows RIFF Wave (BWF) (*.wav) or Apple AIFF Wave (*.aif ) file.What is BWF (Broadcast Wave Format)? BWF (Broadcast Wave Format) is a WAVE format that includes time data. When BWF is used, portions that have not been recorded will not be output in the WAVE file, thus reducing the file size. When the file is imported into a DAW application that supports BWF, the timing information of the original BR track will be re-created. BR Track 0 seconds20 seconds40 secondsBR Track 0 seconds20 secondsNot recorded Exported in WAVE or AIF formatWAVEBWFFile0 secondsSilentExported in BWF format 0 secondsFile 120 seconds File 2440 secondsNot recorded  5. Select the save location for the file. 6. In [Name], specify the filename for saving. When the file is saved, the track number and V-Track number are appended to the end of the file name. 7. Click [Save], and the file will be saved. If you decide to abort the conversion, click [Cancel]. * Loop effects are not added to saved files. * If you cancel a conversion, the data that’s been converted

MICRO BR BR-80 BR-80 BR Series Wave Converter

Download from proxy SP-555 Wave Converter 1.00 vivobook iCloud repack SP-555 Wave Converter 1.00 torrent index hewlett packard free version msi SP-555 Wave Converter lenovo toshiba sony vaio full SP-555 Wave Converter (1.00) thinkpad alienware Box repack SP-555 Wave Converter 1.00 pc thinkpad how to install p2p SP-555 Wave Converter. SP-555 Wave Converter is an application that allows bi-directional conversion between the samples in a memory card formatted for the SP-555 and ... SP-555 Wave Converter - Download SP-555 Wave Converter ... SP-555 Wave Converter A guide to uninstall SP-555 Wave Converter from your PC SP-555 Wave Converter is a software application. This page holds details on how to ... Roland SP-555 - Manual (Page 40) - Manualsdir By using the included “SP-555 Wave Converter” software, ... distributed, or reproduced without the permission of SP-555 WAV Converter Version 1.00 (PC). SP-555: Creative Sampler ... Sign up for the Roland Canada newsletter to keep up-to-date on new products, ... Bundled Wave Converter software (Mac and PC) ... SP-555 Wave Converter is an application that allows bi-directional conversion between the samples in a memory card formatted for the SP-555 ... PC desktop ... This page offers you information on SP-555 Wave Converter program and instruction to teach you correctly and safely uninstall SP-555 Wave Converter. SP-555; glamrock's review - Roland SP-555 + Roland SP-555. SP-555, Sampler from Roland in the SP series. 12 user reviews. ... Converter waveforms (Mac and PC) ... SP-555: Creative Sampler with Performance Effects - Realtime Audio Toolkit. BR WAV Converter v3.1 (PC) The BR Series WAVE Converter allows import/export of BR-Series tracks into WAV/AIFF files. BR WAV Converter v3.11 (Mac) The BR Series WAVE Converter The BR Series WAVE Converter allows import/export of BR-Series tracks into WAV/AIFF files. BR WAV Converter v3.11 (Mac) The BR Series WAVE Converter allows import/export of BR

BR Series Wave Converter 3.10 - Download

Filename: acoustica mp3 to wave converter plus downloadDate: 9.04.2012Size: 53.81 MBType of compression: zipTotal downloads: 837Author: preventheeFile checked: KasperskyDownload speed: 19 Mb/sTime: 23.05.2012author: concmuspeAcoustica MP3 To Wave Converter Plus - CNET Download.comDownload Acoustica MP3 To Wave Converter Plus - Convert your mp3 files into waves with just two clicks!Extremely useful software to convert MP3s into WAVs , Over 4 million downloads since 2000 ! Acoustica MP3 To Wave Converter Plus It.MP3 To Wave Converter Plus - Download Now!. Download 1 (filekicker.com) Download 2 (cachefly.net) After clicking a download link, you should see a file download.Acoustica | MP3 To Wav Converter PLUS - Convert your MP3, WMA, and.With this program there are no confusing bit-rate calculations, and you don't need to know rocket science. With Acoustica MP3 To Wave Converter Plus, you can convert.Read user reviews, ratings, and comments for Acoustica MP3 To Wave Converter Plus and other Rippers & Converting Software user reviews at CNET Download.com.MP3 to WAVE Converter - Acoustica MP3 to WAVE Converter Plus downloadAcoustica | MP3 To Wave Converter Plus - Download Now!Acoustica MP3 To Wave Converter Plus user reviews and ratings.Download Acoustica MP3 To Wave Converter Plus 2.6 Build 25 Free.MP3 To Wave Converter PLUS Download our easy, hands-free MP3 to WAV Converter! It automatically converts MP3 & WMA files into CD compatible WAV files!acoustica mp3 to wave converter plus download Acoustica MP3 To Wave Converter Plus - CNET Download.comAcoustica-MP3-To-Wave-Converter-PLUS Torrent DownloadAcoustica MP3 To Wave Converter Plus - CNET Download.comMP3 to WAVE Converter - Acoustica MP3 to WAVE Converter Plus downloadDownload Acoustica MP3 To Wave Converter Plus 2.5b24 Free trial.MP3 to WAVE Converter - Acoustica MP3 to WAVE Converter Plus downloadMP3 to WAVE Converter PLUS Review and DownloadAuthor: linsrepmyth defender full version download