Download USB Safely Remove 6 3 2 1286

Removing multiple USB plugs may cause USB files to fail. Although Windows features "Safely Remove Hardware and Eject Media" to push your USB drive out of the system safely and conveniently. However, there is no feature to reconnect the USB immediately after the USB is ejected. If you used to follow the method of removing the USB and plugging it back in, your method seems to be costly and inconvenient.Instead of having to take steps to do so, you can use one of the options below to avoid doing those steps.Safe and time-consuming. 1. DevEject DevEject is a simple software configured to replace "Safely Remove Hardware and Eject Media" in Windows. DevEject has the ability to eject, unplug, detect files to use to prevent devices from being ejected, and support Hotkey (hot key). 5 simple ways to reconnect USB without 'unplugging' Picture 1 Just select the device from the Dev Eject and click the Replug button as shown above. Replug function works stably when tested in Windows XP and Windows 7 but the operation is not stable in Windows 8.1 . Although the Dev Eject usually has to be installed and set up, you can still copy the program folders to another computer and use it without reinstalling. Download DevEject here. See also: Fix USB errors that cannot copy files larger than 4GB 2. USB Safely Remove USB Safely Remove is an extended USB device management program. It can completely replace "Safely Remove Hardware Icon" in Windows and provide more functions like Renaming / Stopping / Hiding , auto-connect / disconnect programs, command lines and support. keyboard shortcuts, detecting the cause of a non- Stop / Eject device , and most importantly, being able to reconnect a device instantly without having to "unplug it" as often as you normally would use. 5 simple ways to reconnect USB without 'unplugging' Picture 2 USB Safely Remove can even detect and notify you if other devices will be affected when the USB has just been ejected and you can set it back up. Download USB Safety Remove here. 3. Zentimo Zentimo is the successor of USB Safely Remove . Zentimo is created by developers for the purpose of managing external storage devices. It has all the same features as USB Safely Remove and a quick and easy mobile application launcher, checking the speed of the drive, disabling Autorun functionality in Windows. To reconnect

Prefer using an official Microsoft tool, you can use the Windows USB/DVD Download Tool to create a bootable USB drive. Follow these steps:1. Download the Windows USB/DVD Download Tool from the Microsoft Store and install it on your computer. 2. Insert the USB drive into your computer’s USB port. 3. Launch the Windows USB/DVD Download Tool. 4. Click on the "Browse" button and select the Windows 8.1 ISO file. 5. Click on the "Next" button. 6. Select the "USB device" option and click on the "Begin copying" button. 7. Choose the USB drive from the dropdown menu and click on the "Erase USB Device" button. 8. The tool will format the USB drive and copy the Windows 8.1 installation files to it. 9. Once the process is complete, you can safely remove the USB drive from your computer.Pros: – The Windows USB/DVD Download Tool is an official Microsoft utility. – It is simple to use and does not require any additional software. – The tool supports a wide range of Windows operating systems.Cons: – The Windows USB/DVD Download Tool has limited customization options. – It may take longer compared to other third-party utilities.Option 3. How to Create a Bootable USB Drive via Command PromptIf you prefer using the Command Prompt, you can create a bootable USB drive for Windows 8.1 installation. Follow these steps:1. Open the Command Prompt as an administrator. 2. Type "diskpart" and press enter to open the DiskPart utility. 3. Type "list disk" and press enter to

The BIOS image now...System would restart with recovered image after a few seconds... Step 6 Wait for server to complete the BIOS update, and then remove the USB drive from the server. Note During the BIOS update, Cisco IMC shuts down the server and the screen goes blank for about 10 minutes. Do not unplug the power cords during this update. Cisco IMC powers on the server after the update is complete. Procedure 2: Use BIOS Recovery Header and bios.cap Recovery File Procedure Step 1 Download the BIOS update package and extract it to a temporary location. Step 2 Copy the contents of the extracted recovery folder to the root directory of a USB drive. The recovery folder contains the bios.cap file that is required in this procedure. Note The bios.cap file must be in the root directory of the USB drive. Do not rename this file. The USB drive must be formatted with either the FAT16 or FAT32 file system. Step 3 Shut down and remove power from the server as described in Shutting Down and Removing Power From the Server. Disconnect power cords from all power supplies. Step 4 Slide the server out the front of the rack far enough so that you can remove the top cover. You might have to detach cables from the rear panel to provide clearance. Caution If you cannot safely view and access the component, remove the server from the rack. Step 5 Remove the top cover from the server as described in Removing the Server Top Cover. Step 6 Locate header block J38 and pins 11-12, as shown in Service Headers and Jumpers. Step 7 Install a two-pin jumper across pins 11 and 12. Step 8 Reconnect AC power cords to the server. The server powers up to standby power mode.